Plumbing and drainage, Wairarapa wide027 282 1112

Installation, repairs and upgrades in the Wairarapa

Hot Water Systems Wairarapa

Valley Plumbing Ltd installs and services hot water systems for Wairarapa homes and businesses, including solar hot water. Call 027 282 1112 and we will talk through the choices.

Stock image: seen from above, a plumber in blue overalls lying on a tiled floor to work under a basin, tools beside him

Hot water systems for Wairarapa homes

Hot water is one of the things you notice only when it stops. Valley Plumbing Ltd installs, repairs and services hot water systems, and we offer a complete selection of solar hot water services. Whether you are replacing an old cylinder, upgrading the pressure or planning a new house, we can talk you through the options.

We work across the Wairarapa, including Greytown, Carterton, Masterton, Featherston and Martinborough.

Stock image: hands tightening the chrome waste trap under a white basin with an orange-handled wrench

Hot water work we do

  • Installing hot water systems, including solar hot water
  • Repairing and servicing gas hot water systems
  • Hot water pressure upgrades
  • Hot water as part of new builds and renovations of bathrooms and kitchens

Gas hot water is covered on our gas fitting page, and general repairs and installations are on our general plumbing page.

What the Building Code asks of a hot water system

BRANZ's Level guide explains that Building Code clause G12 requires a hot water system to deliver safe drinking and washing water, prevent the growth of Legionella bacteria, protect users from scalding during personal hygiene, be safe from explosion, and avoid wasting energy.

In practice that means temperature is controlled. Under the Acceptable Solution G12/AS1, hot water delivered to basins, baths and showers in a household should not exceed 50 degrees Celsius, because water hotter than that can cause serious burns in less than a minute. Kitchen sinks and laundries may receive hotter water, generally around 55 to 65 degrees. If a storage cylinder is used, the water must be heated to over 60 degrees at least once a day to prevent Legionella growth, and then tempered before it reaches the taps.

Pressure matters too. In buildings on a mains pressure supply, valves and controls regulate pressure and temperature, and many manufacturers require a 500 kPa maximum for warranty purposes. That is why a pressure upgrade is more than swapping a valve: the cylinder, the pipework and the fittings all need to suit the pressure they will see.

Choosing a system

The two main choices are how the water is heated and whether it is stored. BRANZ describes continuous flow systems, which heat water as it is used with electricity or gas, and storage systems, which keep a cylinder of hot water heated by electricity, gas, solar energy or a wetback.

BRANZ notes that, in general, solar, solar photovoltaic, heat pump and wetback systems are more energy efficient than traditional electric and gas systems, and that a continuous flow unit can suit a boost for a solar system or an outlet a long way from the main supply. Which is right for you depends on your household, your roof, your energy supply and your budget, which is why we start with a conversation rather than a standard answer.

If you are building, think about hot water while the plans are still flexible. See new builds and renovations for how we fit into a building project.

Hot water questions

Do you install solar hot water?

Yes. Valley Plumbing Ltd offers a complete selection of solar hot water services.

Can you fix my low hot water pressure?

We do hot water pressure upgrades. Call 027 282 1112, tell us what you notice at the taps, and we will talk through what could be causing it.

How hot should the water at my basin or shower be?

Under the Building Code's Acceptable Solution G12/AS1, hot water at basins, baths and showers in a household should not exceed 50 degrees Celsius.

Why does a cylinder get heated above 60 degrees?

BRANZ explains that a storage cylinder must be heated to over 60 degrees at least once a day to prevent the growth of Legionella bacteria, and the water is then tempered before it is delivered to your taps.

Which areas do you work in?

We work Wairarapa wide, including Greytown, Carterton, Masterton, Featherston and Martinborough.

Ask us about hot water

We strive to provide only the highest quality of services to our clients. Give us a call today and we will be happy to answer any questions that you may have. We look forward to hearing from you.

Contact

Contact us

TALK TO US NOW ON

027 282 1112

or leave a message using the form below